- 0 kr
Lägg till en bevakning så meddelar vi dig så snart varan är i lager igen.
The Dynavin VC-MECE is a bespoke reversing camera designed specifically for
use with the Mercedes-Benz C-Class (W203, 2002-2007), E-Class (W211, 2002-2008)
and CLS-Class (W219, 2004-2011). Its unique design means that no holes need to be
drilled when mounting; the VC-MECE will simply replace your existing rear license
plate light lens cover, integrating seamlessly with the original mounting points and
maintaining illumination by utilising the original bulb. The VC-MECE is designed to
replicate the size and shape of the existing license plate light cover but with the addition
of a discrete inbuilt camera.
Dynavin are a leading brand producing some of best quality bespoke cameras on the market.
Once correctly installed, the VC-MECE will automatically power on as soon as the vehicle is put into reverse delivering a PAL video signal via the included 6 metre RCA video cable signal to any monitor with an RCA reverse camera input. All Dynavin head units have an RCA reverse camera input and are fully compatible with the VC-MECE.
The VC-MECE camera is also compatible with any aftermarket car head unit with a suitable video input. If your aftermarket head unit has a dedicated camera input then the VC-MECE can be set up so that the rear-view image can be automatically displayed as soon as the car is put into reverse.
The VC-MECE is not designed for use with original factory-fitted monitors or OEM displays, as vehicle manufacturers do not design their equipment with the required RCA video inputs used by aftermarket cameras.
WILL THIS WORK IN MY MERCEDES-BENZ?
The Dynavin VC-MECE Reversing Camera is a no-holes/drill-required bespoke solution compatible with the following Mercedes-Benz vehicles:
Mercedes-Benz C-Class (W203, 2002-2007)
Mercedes-Benz E-Class (W211, 2002-2008)
Mercedes-Benz CLS-Class (W219, 2004-2011)
This camera will be compatible with any variant of the above vehicles (engine size or vehicle spec does not matter).
Vehicle compatibility list is for guide purposes only, please check the dimensions or part number of your original Mercedes-Benz license plate light and compare with the information/pictures in this listing before purchase to confirm compatibility.
Some W211 E-Class vehicles are fitted with a chrome strip on the boot lid above the number plate, these vehicles may require a spacer fitting during installation so the camera can sit slightly lower and fully see past this trim. Your installer would be required to fabricate such a part.
The picture below shows the original Mercedes-Benz rear number plate lamp this camera is designed to replace. The OEM part number which is on the front of the lamp lens cover is A2038200256, please check this is the same as your rear number plate lamp to ensure compatibility. The VC-MECE is designed to replace the OEM lamp cover whilst maintaining use of the original lamp and bulb. Occasionally the original lamps can be fitted in reverse, as the OEM hole in the chassis allows for this. If you find the camera seems to point the wrong way following installation, simply turn the original lamp housing round as it is reversable.
|Technical Specification - Optimized for Dynavin|
|Resolution||(TV Line) 42|
|Lens Angle (Deg.)||170 Wide Angle|